Will this loader fit a allis chalmers D15 series 2
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=140551
Printed Date: 16 Nov 2024 at 2:37pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Will this loader fit a allis chalmers D15 series 2
Posted By: toddkatz
Subject: Will this loader fit a allis chalmers D15 series 2
Date Posted: 18 Jul 2017 at 8:16pm
Does this loader have the oil resevoir in frame? 
|
Replies:
Posted By: DSeries4
Date Posted: 18 Jul 2017 at 8:30pm
|
I do not see any reservoir and front pump. Will it fit on a D15? Couldn't tell you, but anything can be made to fit with enough welding/butchering. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: JoeO(CMO)
Date Posted: 18 Jul 2017 at 8:44pm
|
the RH upright is also a oil tank you can see the pipe plug under the control valve and the bottom part of frame is also part of it, as can be seen with the large hose from the valve goes down to the tank/frame
------------- |
Posted By: shameless dude
Date Posted: 18 Jul 2017 at 9:52pm
| all loaders have to be modified with dif brackets to fit any tractor! |
Posted By: desertjoe
Date Posted: 18 Jul 2017 at 10:03pm
|
That 1/2" coupling with a plug in it that faces to the rear of the vertical reservoir is the oil level overflow. You give a Farmer a nig welder, a cuttin torch and a 4 1/2" angle grinder,,,and a couple three days and he'd have that thing mounted and workin,,,,no problem,,,,,  |
Posted By: JC-WI
Date Posted: 19 Jul 2017 at 2:14am
|
Looks a little heavy...
------------- He who says there is no evil has already deceived himself The truth is the truth, sugar coated or not. Trawler II says, "Remember that." |
Posted By: Gary Burnett
Date Posted: 19 Jul 2017 at 4:04am
|
I have a loader on an I600 I'll sell should go easily on the D15 |