Allis Chalmers D17 series 1 or 2
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14013
Printed Date: 02 Feb 2025 at 1:12pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis Chalmers D17 series 1 or 2
Posted By: danr
Subject: Allis Chalmers D17 series 1 or 2
Date Posted: 17 Jun 2010 at 6:07pm
| Need Help! I have a D17 that starts and runs great but if I accidently kill the engine after using it for an hour it will not start. If I let it set for an hour or so it will start and run again just fine. Is there a fix for this? |
Replies:
Posted By: BobHnwO
Date Posted: 17 Jun 2010 at 6:12pm
|
Does the engine turn over fast or slow when it's hot?
------------- Why do today what you can put off til tomorrow. |
Posted By: TexasAllis
Date Posted: 18 Jun 2010 at 8:05am
Gas or Diesel?
|
danr wrote:Posted By: powertech84
Date Posted: 18 Jun 2010 at 8:49am
| coil |
Posted By: john(MI)
Date Posted: 18 Jun 2010 at 9:29am
|
I had a WD once. If you just shut it off it would be a real pain to get started again, whenever you tried, even if I turned the gas off at the sediment bowl after shutting it off. If I shut off the gas at the sediment bowl and let it run itself out, it would fire right up the next time I used it. Never did figure that one out! Good Luck! ------------- D14, D17, 5020, 612H, CASE 446 |
Posted By: Chuck(ONT)
Date Posted: 18 Jun 2010 at 9:51am
|
Possibly vapor lock.
------------- Never take life too seriously. Nobody gets out alive anyway! 1C 1 WD45 1 AC180 |
Posted By: gcalent
Date Posted: 21 Jun 2010 at 10:31am
| Most likely the condencer,or the coil if it turns over OK |
Posted By: danr
Date Posted: 21 Jun 2010 at 2:29pm
| Gas |
Posted By: danr
Date Posted: 21 Jun 2010 at 2:29pm
| on the slow side |
Posted By: danr
Date Posted: 21 Jun 2010 at 2:32pm
|
what is the fix for vapor lock? |