8550 muffler
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=139448
Printed Date: 16 Sep 2025 at 12:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 8550 muffler
Posted By: darrel in ND
Subject: 8550 muffler
Date Posted: 15 Jun 2017 at 4:06pm
|
Anyone know of a good source for a new muffler for an 8550. .? Agco Shoups. ..? Any vendors on here. ...? Thanks Darrel
|
Replies:
Posted By: victoryallis
Date Posted: 15 Jun 2017 at 7:07pm
Sounds like straight pipe time!!!!!! I have a tractor with a VT903 and a straight pipe needless she has a bark outside but isn't too bad inside.
-------------
8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760
|
Posted By: DougG
Date Posted: 15 Jun 2017 at 7:44pm
|
Straight pipes work but they are something to get done unless theres a shop close, maybe try Agco they prolly got just the right one
|
Posted By: darrel in ND
Date Posted: 15 Jun 2017 at 9:06pm
|
Two straight pipes on er is definitely my first choice, but I see that each muffler has an aspirator tube going to it. How would I accommodate that....? Darrel
|
Posted By: randy
Date Posted: 15 Jun 2017 at 9:17pm
Thormure muffler. 800 527 9954. He is a wealth of knowledge!
-------------
CA WD WD45 D17 D17 Diesel 7060 8050 8070
|
Posted By: SteveM C/IL
Date Posted: 15 Jun 2017 at 9:24pm
|
I was looking for aspirators a few years ago when considering removing muffler on 8070. They was like $400 for inline aspirator.In your case I would think a muffler wouldn't be much higher.
|
Posted By: orangeman69
Date Posted: 15 Jun 2017 at 9:57pm
we have a pair of used mufflers that we took off seem to be in good shape. we wanted straight pipes on it. pm me if your interested.
-------------
d17,d17nfpuller,d-17IVdiesel,d19gas,d19diesel nf,d21seriesII,180,190xtseries III,200,210,7020,7060,7080w/8.3cummins,8070fwa w/8.3cummins,8550 185 w/322 original hrs.
|
Posted By: Peterson
Date Posted: 16 Jun 2017 at 11:09am
Just take two 4 inch pipes, measure the aspirator tube and get two 90* pipes that size and weld them into the 4 inch pipes so the one end is 90* angle from the 4 inch. And there is your aspirator pipes.
-------------
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2
|
|