What combine engine will fit in a 185 diesel
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=139437
Printed Date: 27 Nov 2024 at 5:33pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: What combine engine will fit in a 185 diesel
Posted By: autobody
Subject: What combine engine will fit in a 185 diesel
Date Posted: 15 Jun 2017 at 8:16am
|
I have a 185 diesel that is getting water in oil. Thought it might be easier to swap out engine than overhauling mine. Need to know which combine engine to get |
Replies:
Posted By: CAL(KS)
Date Posted: 15 Jun 2017 at 8:42am
|
likely sleeve orings. if you overhaul it you would have a new engine. combine engine swaps are not straight forward drop ins and you never really know what your getting. ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: farmtoybuilder
Date Posted: 16 Jun 2017 at 10:21am
|
I agree with CAL! Just rebuild your engine! ------------- 5 different TT-10's,5 TT-18's Terra Tigers,B-10,2 B-207's,B-110,2 B-112's,HB-112,B-210,B-212,HB212,2 Scamp's & Homilite T-10. Still hunting NICE HB-112 & anything Terra Tiger & Trailers for them. |
Posted By: DSeries4
Date Posted: 16 Jun 2017 at 9:18pm
|
I agree as well. Rebuild your engine. You will know what you have. No telling what you will get in a used engine. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: tbran
Date Posted: 16 Jun 2017 at 9:52pm
|
it has been discussed at length here before - it is a lot of work - combines have no provision for hyd pump drive - different oil pump unless you find a G diesel and still have to change front covers - water pump will not fit radiator - it will work - we have done it several times - but it is cheaper and ez ier to overhaul your engine. ------------- When told "it's not the money,it's the principle", remember, it's always the money.. |
Posted By: SteveM C/IL
Date Posted: 16 Jun 2017 at 10:27pm
| If the lower bores are bad enough,there are shops that bore and sleeve them. |
Posted By: Peterson
Date Posted: 17 Jun 2017 at 7:08am
To answer your question, any 301 will work. It all depends on how much stuff you want to change.
------------- 7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2 |
autobody wrote:Posted By: autobody
Date Posted: 17 Jun 2017 at 3:08pm
| Thanks for input will do an overhaul |