7060 torque limiter
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=139225
Printed Date: 29 Aug 2025 at 5:44pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7060 torque limiter
Posted By: Dean(IA)
Subject: 7060 torque limiter
Date Posted: 08 Jun 2017 at 9:39pm
|
A technician that I am acquainted with, took the torque limiter apart and found 2 Bellville washers. I don't believe I have ever heard of this before. I think it should function properly if everthing has the right measurements and 1 Belleville washer is used . Or am I wrong? |
Replies:
Posted By: 210Postin
Date Posted: 08 Jun 2017 at 9:48pm
| they were trying to get to hold with more force machine flywheel a little more problem fixed |
Posted By: wayneIA
Date Posted: 09 Jun 2017 at 12:36am
| Local dealer on 7060's especially uses 2 Bellevue washers and puts a lock washer under the Bellevue clamp to compensate for the added Bellevue. They claim that with the extra horsepower of the 7060 over the smaller models, it has a tendency to slip the torque limiter. |
Posted By: Lonn
Date Posted: 09 Jun 2017 at 7:01am
 ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
210Postin wrote:Posted By: DrAllis
Date Posted: 09 Jun 2017 at 7:24am
| I started double springing them in 1978 for a pulling tractor. A good quality 1/2" lock washer is the same thickness as the second Belleville spring. Longer Gr8 bolts are used in the spacer stools. You can't machine a flywheel enough to get the same results as two springs. |
Posted By: 210Postin
Date Posted: 09 Jun 2017 at 12:34pm
| use one spring will hold 300 hp |