Mounting and Dismounting the C
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=13920
Printed Date: 02 Feb 2025 at 4:51am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Mounting and Dismounting the C
Posted By: Dave Richards (WV)
Subject: Mounting and Dismounting the C
Date Posted: 15 Jun 2010 at 1:32pm
|
http://public.fotki.com/dave994/levels-farm/cimg0317.html
|
Replies:
Posted By: GlenninPA
Date Posted: 15 Jun 2010 at 2:14pm
|
Don't you wish it was that easy for you to get on and off? LOL!
|
Posted By: Chuck(ONT)
Date Posted: 15 Jun 2010 at 2:16pm
http://public.fotki.com/dave994/levels-farm/cimg0317.html - http://public.fotki.com/dave994/levels-farm/cimg0317.html
Cute, will have to turn my draw bar around.
-------------
Never take life too seriously.
Nobody gets out alive anyway!
1C 1 WD45 1 AC180
|
Posted By: Kip-Utah
Date Posted: 15 Jun 2010 at 2:34pm
Makes it look natural & EZ!
-------------
HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!!
|
Posted By: Dave Richards (WV)
Date Posted: 15 Jun 2010 at 3:13pm
|
I think the trick is the triple knee change at the end. Chuck, this C came with two draw bars and a swinging tongue between them. It sure is a knee saver. Think I will put the plow draw bar on the other C.
|
Posted By: steve(ill)
Date Posted: 15 Jun 2010 at 5:22pm
thats kind of what i look like getting on also... but he seems to be in better condition once his backside hits the seat !
-------------
Like them all, but love the "B"s.
|
Posted By: Dave(inMA)
Date Posted: 15 Jun 2010 at 5:46pm
Clever! Will have to try that on mine.
-------------
WC, CA, D14, WD45
|
Posted By: Dusty MI
Date Posted: 15 Jun 2010 at 6:43pm
|
I like the step I built for my D-10. See my Avatar.
Dusty
-------------
917 H, '48 G, '65 D-10 series III "Allis Express"
|
Posted By: DREAM
Date Posted: 15 Jun 2010 at 9:13pm
|
Cute Dave! Good to see the little ones that are interested in the tractors. Brother and I used to crawl up on my grandads C, just didn't have the second drawbar. We just helped each other get up until we got tall enough to get a foot up on the axle hub(rims, hubs turned out for cultivators.) We then set the left foot on the final, turned and stepped over the fender with the right leg, held onto the steering wheel til we got the left leg over, then sat down while holding the wheel. Nice and comfy once you got there. Just a sequence to go through first. Get out of time, it's a little tricky. LOL! Getting back off was reverse order(kiinda). Now I have the cultivator frame to step up on(paw-paws only had cults on the right side, just wanted one row at a time).
|
|