WC Shifter
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=138897
Printed Date: 03 Apr 2026 at 12:26pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WC Shifter
Posted By: boilerpete
Subject: WC Shifter
Date Posted: 30 May 2017 at 7:10am
|
The gear shifter on my 37 WC is loose - lots of play in the lever, and there is a tendency to jump out of gear every once in a while. I took it off the transmission hoping I'd see something obviously wrong with it, but there's nothing that looks broken in there. If I were to take it completely apart, how much trouble am I getting in to? What will be worn and need replacing? Are the usual parts available? Counting this time, I'll have done this once. I'm a little nervous about tearing into it, but it's not right so I have to do something. Is it easier just to replace the whole assembly? Who has one, if that's the case? Thanks in advance!
|
Replies:
Posted By: Ted J
Date Posted: 30 May 2017 at 7:36am
|
I've never done it myself, but I know a few guys that have. I'm sure that at least one of them will be giving you some help. All I know is that it IS a PITA but not rocket science... I'll check back later and see if you've gotten the help you need. ------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |
Posted By: tractorman
Date Posted: 30 May 2017 at 8:26am
|
in the process of tightening up my shift lever on my WF, WF- WC are the same. Need to replace the pin on the side of the tower, and maybe redo the slotit slides in. I am thinking ( with a lot of luck one could un attcah the spring cage and washer with ot taking out the  ing rails. am stalling on doing it . want to devote time to do it with an extra hand or two as well. Look at the parts books for the parts and assembly drawing s. ------------- Play on 38 B 49 WF , working on D14, D15 B10, Bee 12 B110. use 185 and 190 |