7020 3 point pin size
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=13881
Printed Date: 02 Feb 2025 at 3:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7020 3 point pin size
Posted By: Josh(NE)
Subject: 7020 3 point pin size
Date Posted: 14 Jun 2010 at 3:30pm
|
anyone know the pin size on a 7020 3 point? I believe they are 1 1/8 on all three can anyone tell me for sure. thanks ------------- Allis Express '65 190XT, 37 B, '72 170, '83 8030, and the IH 560 was a mistake |
Replies:
Posted By: Hurst
Date Posted: 14 Jun 2010 at 3:34pm
|
That tractor should have a category 2 3pt hitch set up, in which case, you will have 1-1/8 inch lower links and a 1-inch upper link. This link should help:
Hurst ------------- 1979 Allis Chalmers 7000 5800 Hours |
Posted By: Josh(NE)
Date Posted: 14 Jun 2010 at 3:52pm
|
tractor data list it as catagory 3/2 so I still don't know for sure. I thought there was somthing different about it than the strait cat.2 that is on the 190 ------------- Allis Express '65 190XT, 37 B, '72 170, '83 8030, and the IH 560 was a mistake |
Posted By: cwhit
Date Posted: 14 Jun 2010 at 3:59pm
| My 7020 is a cat. 3. |
Posted By: skipwelte
Date Posted: 14 Jun 2010 at 4:31pm
| Its Catagory 3, the upper pin is a little smaller than the lower two. I dont remember the size right off hand. |
Posted By: BobHnwO
Date Posted: 14 Jun 2010 at 5:09pm
|
Should be cat.3,use bushings for cat.2 implements.
------------- Why do today what you can put off til tomorrow. |
Posted By: Hurst
Date Posted: 14 Jun 2010 at 5:25pm
|
Well, I learned something new today.
Hurst ------------- 1979 Allis Chalmers 7000 5800 Hours |
Posted By: michaelwis
Date Posted: 14 Jun 2010 at 5:29pm
that is correct ..same as my 7040 ------------- WD WD45 DIESEL D 14 D-15 SERIES 2 190XT TERRA TIGER ac allcrop 60 GLEANER F 6060 7040.and attachments for all Proud to be an active farmer |
BobHnwO wrote: