Farm Equipment - CA lift valve?

Print Page | Close Window

CA lift valve?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=13873
Printed Date: 02 Feb 2025 at 5:03am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: CA lift valve?

Posted By: Nat
Subject: CA lift valve?
Date Posted: 14 Jun 2010 at 12:01pm

I have a question on a CA Lift. If you are looking from the back at the valve the seal where the lift handle goes thru is leaking badly. Does anyone make the seal or does anyone have one they want to sell? thanks, Nat

Replies:

Posted By: Nat
Date Posted: 14 Jun 2010 at 8:57pm

Thought maybe I ask a different way. The seal in question is on the left side of the valve boby if looking from the rear. The walve shaft goes thru the body of the valve and the left end of the shaft is where the leak is. Anyone got any answers? Thanks, nat

Posted By: wkpoor
Date Posted: 14 Jun 2010 at 9:09pm

I've rebuilt a couple of those Valves. Sandy lake has the kit but if I remember right its mostly O-rings. Take it apart on a clean table and maybe the o-ring in question will just be hardware run.

Posted By: Ted in NE-OH
Date Posted: 15 Jun 2010 at 9:35am

Sandy Lake Implement has the seals 888-252-0656

-------------
CA, WD, C, 3 Bs, 2 Gs, WC, I-400, 914

Posted By: Nat
Date Posted: 15 Jun 2010 at 8:01pm

Thanks, I pressure washed it today and can now see the seal, and yes it is an o-ring.

I've had a bunch of AC's over the years, but really like this CA. it starts and runs like a new one, but does smoke when first started, probably needs valve seals. I bought it with a SC blade and the origional 2 bottom plaw. I still has all the Snap Coupler on it and it works well. Pics to come later, Thanks, Nat