Farm Equipment - PUSH RODS

Print Page | Close Window

PUSH RODS

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=138052
Printed Date: 24 Sep 2025 at 6:50am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: PUSH RODS

Posted By: augercreek
Subject: PUSH RODS
Date Posted: 03 May 2017 at 1:15pm

A while back I was helping a friend on his 170 ALLIS , WE HAD BENT A FEW PUSH RODS ( THE ORIGINAL ONES ) So we ordered new from Steiner and we had trouble wit the rocker arms not being able to get them in place. Well I measured the tips that go into the lifters and the new ones are ten thousands .010 too big to go into the holes in the lifters ! Not all of the lifters were the same either ! So I ground them down the .010" and now they fit. Problem solved .

Replies:

Posted By: steve(ill)
Date Posted: 03 May 2017 at 4:34pm

The chineese have trouble converting inches to millimeters.

-------------
Like them all, but love the "B"s.