Farm Equipment - Dash in 200 ????

Print Page | Close Window

Dash in 200 ????

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137453
Printed Date: 01 Jun 2025 at 1:41am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Dash in 200 ????

Posted By: Mikez
Subject: Dash in 200 ????
Date Posted: 16 Apr 2017 at 8:34pm

I have a allis 200 with I think year round cab. My question is can you slip the top cover of dash out from under the cab bracket that goes over it. Hope that's explained good enough lol. I want to hook a wire up behind dash.
Thanks

Replies:

Posted By: Unit3
Date Posted: 16 Apr 2017 at 8:39pm

Should be able to. Even with a factory cab, it is a tight fit, but it came out. I put 1/4" fender nuts on mine. 1/4" bolts hold down the cover tighter than screws.

-------------
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C

Posted By: Mikez
Date Posted: 16 Apr 2017 at 9:09pm

Ok thanks

Posted By: DanWi
Date Posted: 16 Apr 2017 at 9:11pm

Put your steering down low and on a 200 extend it out and if nobody bolted anything else in the way you can slide it into the cab.

Posted By: Mikez
Date Posted: 16 Apr 2017 at 9:20pm

Ok thanks again

Posted By: Joe(TX)
Date Posted: 17 Apr 2017 at 10:41am

Most cabs have a removable plate on the front around the dash cover.

-------------
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A