Farm Equipment - clutch adjustment Model U

Print Page | Close Window

clutch adjustment Model U

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=13732
Printed Date: 01 Feb 2025 at 10:46pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: clutch adjustment Model U

Posted By: Roger Nolin
Subject: clutch adjustment Model U
Date Posted: 11 Jun 2010 at 5:38pm

got the new clutch disc in. adj bolts screwed all the way in. finger out toward throwout bearing. 1/4 in between finger and bearing. start it up push clutch all the way down. cannot get in gear due to continuous grinding. HELP thanks< id="gwProxy" ="">< ="jsCall;" id="jsProxy" ="">

Replies:

Posted By: Leon B MO
Date Posted: 11 Jun 2010 at 6:55pm

Ajust the length of the rod( with yolk) from the pedal to the cross shaft, your throwout bearing can be much closer than 1/4 inch, just as long as it's not touching.

Leon B

-------------
Uncle always said "Fill the back of the shovel and the front will take care of itself".

Posted By: Roger Nolin
Date Posted: 11 Jun 2010 at 7:18pm

Leon, there is no rod on my 35. pedal mounts directly on shaft with key way. i/4 is recommended clearance according to the manual. only adjustment is the fingers. thanks< id="gwProxy" ="">< ="jsCall;" id="jsProxy" ="">

Posted By: Fred in Pa
Date Posted: 11 Jun 2010 at 7:39pm

Call me 717-451-6590 8 am to 9 pm eastern time

Posted By: Roger Nolin
Date Posted: 11 Jun 2010 at 11:43pm

will call in the morning Fred thanks< id="gwProxy" ="">< ="jsCall;" id="jsProxy" ="">