Pulling Forum - Bernie Platz 7000 puller questions

Print Page | Close Window

Bernie Platz 7000 puller questions

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=136894
Printed Date: 27 Nov 2024 at 9:21pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Bernie Platz 7000 puller questions

Posted By: DougG
Subject: Bernie Platz 7000 puller questions
Date Posted: 02 Apr 2017 at 7:21am

Was looking at pics of Bernies 7000 and wondering if he has a cover of metal over the Power Director or is that a fabricated piece to take the place of the PD housing? Guess all you really need is the shaft going back and a few bearings to keep it in place,,,

Replies:

Posted By: BKarpel
Date Posted: 02 Apr 2017 at 5:02pm

I think he has a 190 rear end with a 426 block motor. He broke the right axle housing at Gordyville this winter.

Posted By: DougG
Date Posted: 02 Apr 2017 at 6:11pm

Yeah know all that,,, Does he have the Power Director in it or a fabricated piece?

Posted By: injpumpEd
Date Posted: 03 Apr 2017 at 6:56am

Betting the power director has been long gone! prolly has a pro-fab in place of pd.

-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!

Posted By: bsallis180
Date Posted: 03 Apr 2017 at 5:41pm

IVT tranny