912 hydro help
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=136888
Printed Date: 02 Oct 2024 at 5:24am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 912 hydro help
Posted By: NATHAN CAIRNS
Subject: 912 hydro help
Date Posted: 01 Apr 2017 at 9:35pm
|
i looked at the 912 today and i noticed these things: missing gas tank, frozen levers, rotted steering wheel (turns freely on shaft), no very bad rust it looks pretty good besides some missing pieces. im going to take off the engine and bring it home to work on it. if it run, then ill work on the tractor. but here is my question what should i do about the missing gas tank, frozen levers and petal ect photos below
------------- B212, WD45, B, 912 Hydro |
Replies:
Posted By: NATHAN CAIRNS
Date Posted: 01 Apr 2017 at 9:44pm
 ------------- B212, WD45, B, 912 Hydro |
Posted By: NATHAN CAIRNS
Date Posted: 01 Apr 2017 at 9:47pm
 ------------- B212, WD45, B, 912 Hydro |
Posted By: NATHAN CAIRNS
Date Posted: 01 Apr 2017 at 9:50pm
|
ON THIS PICTURE I WOULD LIKE TO KNOW IF THE HOLE WHERE THE GEARSHIFT WOULD BE NA 212 SHOULD BE THERE  ------------- B212, WD45, B, 912 Hydro |
Posted By: Mikez
Date Posted: 01 Apr 2017 at 10:31pm
| There's no gear shift on a hydro. Just the same frame with different decals that cover that part of frame. The bigger lever on right is the hydro lever. Which is what moves tractor. Get yourself a bunch of penetrating oil and soak all your moving parts while you work on motor. I should have a salvaged gas tank for it. |
Posted By: Jim Hancock
Date Posted: 05 Apr 2017 at 11:57pm
|
Nathan, That hole is where the shuttle transmission gear shift comes through. I have a 712 tractor with the shuttle shift and it gets right along in 4th gear!  ------------- How blessed we are by HIS GRACE! |