Farm Equipment - 28" power adjust rims

Print Page | Close Window

28" power adjust rims

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=13669
Printed Date: 01 Feb 2025 at 10:58pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 28" power adjust rims

Posted By: EricTn
Subject: 28" power adjust rims
Date Posted: 10 Jun 2010 at 8:27am

Anyone know if MF 28" power adjust rear rims the same as AC? Are the stops and stop bolt holes the same or angled different. Rims have 16.9-28 tires on them, 14" or 15" rim. Should they work on a D17IV?
Thanks Eric

Replies:

Posted By: Michael Crowe
Date Posted: 10 Jun 2010 at 9:31am

I spoke to Cross Mfg about that when I was buying some 28" wheels; he said the holes and angles are different. They waited until the customer specified the tractor model before putting in the holes in the rails. Michael

-------------
The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/

Posted By: kev/ont
Date Posted: 11 Jun 2010 at 11:40am

Allis Chalmers has the holes in the rails drilled parallell to the axle of the tractor where the massy rims are drill perpendicular to the rail itself. Physically yes they will bolt on but you will need the stops that go with the rim.