CA Cultivator Pictures Needed
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=135933
Printed Date: 22 Jan 2025 at 4:52am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: CA Cultivator Pictures Needed
Posted By: morton(pa)
Subject: CA Cultivator Pictures Needed
Date Posted: 07 Mar 2017 at 7:23pm
|
Hey all, It's been a little while but I'm back in search of some information. I have the opportunity to buy a CA with cultivators. However, the current owner has never had the cultivators mounted and I've never owned one. I want to make sure via pictures that all the parts are there to mount the cultivators before I buy the tractor as I need something field ready for spring and do not have time to put together something put of random pieces that may be missing. If anyone could post pictures of the front and rear cultivators mounted on a CA it would be greatly appreciated. Thanks! |
Replies:
Posted By: Gary Burnett
Date Posted: 07 Mar 2017 at 7:29pm
|
Don't have pictures but the mounting bracket that bolts onto the front of the tractor is the piece most likely to be missing and then the two brackets that mount along side of the engine. |
Posted By: CTuckerNWIL
Date Posted: 07 Mar 2017 at 8:28pm
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: CTuckerNWIL
Date Posted: 07 Mar 2017 at 8:31pm
|
U channel in the front under the rad, the angle iron brackets where the engine side weights go, and the depth control brackets for each side are the big things mostly left on a tractor when sold.
There are brackets for the rear scratcher too but you can cultivate without that mounted. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: David Maddux
Date Posted: 08 Mar 2017 at 2:53am
| I miss my little CA. |
Posted By: Trinity45
Date Posted: 08 Mar 2017 at 6:29am
| Don't forget to use the lift, you have to turn one cylinder around to the front. |
Posted By: morton(pa)
Date Posted: 08 Mar 2017 at 6:34pm
| Excellent. Thanks for the pic. Can someone please expand upon the hydraulic cylinder (I was curious how they are lifted) comment though and does anyone have pictures of the rear scratcher? Thanks. |
Posted By: CTuckerNWIL
Date Posted: 08 Mar 2017 at 8:03pm
|
http://www.allischalmers.com/forum/forum_posts.asp?TID=100105&title=ca-cultivator-info-please" rel="nofollow - http://www.allischalmers.com/forum/forum_posts.asp?TID=100105&title=ca-cultivator-info-please There is a pic in this thread of the tube attached to the depth control arms. The cylinder ( I think it's the right side) gets taken off the pin it is on and swung around facing forward and slides on a different pin. Then it hooks to the tube to push the depth control arms up to lift the front gangs. The other cylinder stays on back and works the rear gang. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: CTuckerNWIL
Date Posted: 08 Mar 2017 at 8:06pm
|
http://www.allischalmers.com/forum/forum_posts.asp?TID=31576&title=ca-cultivator" rel="nofollow - http://www.allischalmers.com/forum/forum_posts.asp?TID=31576&title=ca-cultivator
A pic on this thread shows the rear gang pinned to the lift arms and it has 2 straps that connect to the rear axle brackets. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |