New delivery
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=135655
Printed Date: 30 Jul 2025 at 5:25am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: New delivery
Posted By: JimD
Subject: New delivery
Date Posted: 01 Mar 2017 at 12:36pm
 ------------- Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central. We have new and used parts. 877-378-6543 |
Replies:
Posted By: JimD
Date Posted: 01 Mar 2017 at 12:38pm
|
Front pump seems to have broken the shaft to the front of engine, or the woodruff key is broke. Hopefully a reasonable fix. Under A fame to decide if I want to pull loader or work around it. ------------- Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central. We have new and used parts. 877-378-6543 |
Posted By: JohnCO
Date Posted: 01 Mar 2017 at 3:00pm
|
You are better off then I am, had a piston go bad in my Ford 555B backhoe, cylinder will have to be bored and a sleeve installed, found what I think is a crack in the cylinder wall. To get the engine out was a nearly 30 hour job, considering the time spent hauling tools out from the shop as the rig is too big to fit in my shop. Now I can't find anyone to bore it, probably have to take it to Denver, I HATE going to Denver!
------------- "If at first you don't succeed, get a bigger hammer" Allis Express participant |
Posted By: shameless (ne)
Date Posted: 01 Mar 2017 at 7:31pm
| it's a good looker anyway, and it looks like it's a whole lots easier to gits on and off of. |
Posted By: JoeO(CMO)
Date Posted: 02 Mar 2017 at 7:52pm
|
Nice! where did you find it? ------------- |
Posted By: JimD
Date Posted: 03 Mar 2017 at 9:09am
|
Kind of a weird story. My wife is inheriting a piece of land relatively close (no pun intented, but I'll take credit). It has someone working an oil lease on it, and we are trying to get a grip on what that means. I was looking on the letgo app, and saw it listed, and the 1 name and initial of last name matched that person, and his location matched. So on whim I called and asked if he was the one selling. It was, so I looked at it, and agreed to purchase for $1000 delivered to my house. Runs, drives. Just no hydraulic pressure for the buckets. Tore into it yesterday and the splined shaft between the pump and the crankshaft pulley is either broke, or stripped. Hope to finish today and repair or order parts. ------------- Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central. We have new and used parts. 877-378-6543 |
Posted By: darrel in ND
Date Posted: 03 Mar 2017 at 10:21am
| Jim, I'll give you your thousand bucks back for it any time that you want. Darrel |
Posted By: JoeO(CMO)
Date Posted: 03 Mar 2017 at 3:13pm
|
I don't mind a person wanting to make a quick buck; I'll give you $1001. Or Negotiable. ------------- |
Posted By: Steve allis dozer
Date Posted: 03 Mar 2017 at 3:32pm
| That looks like a nice unit , I have never seen one ( i don't think there is any over here) what tractor is it based on? the loader looks well built . I think you got a good deal with that should be very handy to have around |
Posted By: nickia
Date Posted: 03 Mar 2017 at 4:27pm
|
my 615 used a double sprocket wrapped with a chain is what broke on mine if i had to do it over i would use a love joy connector |
Posted By: JimD
Date Posted: 03 Mar 2017 at 6:40pm
|
The splines were stripped. Just had my machinist friend weld it up. Hope to reassemble tomorrow. ------------- Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central. We have new and used parts. 877-378-6543 |
Posted By: HD6GTOM
Date Posted: 03 Mar 2017 at 7:40pm
| Some guys has all the luck. Hope you get a whole lot off work out of her. |
Posted By: desertjoe
Date Posted: 04 Mar 2017 at 8:13am
Aw shoot,,,Jim,,I was gonna tell you how I "repaired" mine for bout $25,,,and I bet it will never need fixin again,,,,,  you too fast,,,,, The loader looks like a TS500,,,?? |
JimD wrote: