Trip Bucket Angle
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=134999
Printed Date: 02 Oct 2025 at 1:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Trip Bucket Angle
Posted By: meteorbrews
Subject: Trip Bucket Angle
Date Posted: 12 Feb 2017 at 7:31pm
|
I just put a Henderson Loader onto my B, however, the bucket doesn't rest flush with the ground, is there a way that the trip bucket angle can be adjusted?
Brad.
-------------
39/43' Franken B
Amature Homebrewer and Allis Chalmers Novice
|
Replies:
Posted By: copyrite1972
Date Posted: 12 Feb 2017 at 9:38pm
I have the same problem, only I don't know what kind of loader I have! Mine has a pin that pulls out of a hole on the back of the bucket to dump the bucket. I need to adjust the hole by welding up one side, then grinding the other (Did that make sense??) I also thought about adding a second hole in the bracket to make the angle steeper for digging. Do you have a pic you could post?
-------------
D15 Series II
|
Posted By: truckerfarmer
Date Posted: 12 Feb 2017 at 9:41pm
Some of the trip bucket loaders had an adjustable bracket on the back of the bucket.
-------------
Looking at the past to see the future.
'53 WD, '53 WD45, WD snap coupler field cultivator, #53 plow,'53 HD5B dozer
Duct tape.... Can't fix stupidity. But will muffle the sound of it!
|
Posted By: shameless (ne)
Date Posted: 13 Feb 2017 at 1:46am
|
if the loader wasn't designed for any particular tractor, it may not fit just quite right. if you raise the back up, the bucket will lay flatter on the ground. try longer bolts with some spacers where it mounts on the back. otherwise do the modifying to the bucket like said above.
|
|