Farm Equipment - D14 rear wheel

Print Page | Close Window

D14 rear wheel

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=13451
Printed Date: 01 Feb 2025 at 4:53pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D14 rear wheel

Posted By: Killerkukoo
Subject: D14 rear wheel
Date Posted: 05 Jun 2010 at 11:47pm

Hi all. I have a friend who needs a D14 rear wheel. does anyone know where one is at? Also i have a wd 45 on wich the hydralic lever slowly moves up causing the loader to rise. the higher rpm's the faster the lever goes. Any ideas on how to fix this? I have only had my tractor for a couple months.

thanks for any info

Jacob

Replies:

Posted By: Fred in Pa
Date Posted: 06 Jun 2010 at 7:35am

How wide is the rim he has ?,

Posted By: CTuckerNWIL
Date Posted: 06 Jun 2010 at 8:23am

Killer, there is a friction block on the lever that is supposed to help hold it in place. It might need to be replaced. If your traction boost isn't set right, the loader will raise up if there is pull on the drawbar. You should have a manual to show how this is set properly.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: norm [ind]
Date Posted: 06 Jun 2010 at 9:27am

you did not say what type wheel needed [spin out or combine size]

Posted By: Killerkukoo
Date Posted: 06 Jun 2010 at 9:48pm

He told me it is a spin out 28" wheel. the old one is rotted out from calcium to the point the tire cant even stay on. Im getting his info 3rd hand, as i found out its for a friend of a friend..

to CTucker ill replace those blocks first, thats easy and cheap enough, hopes that does it. i dont believe the traction booster is even functional, the lever is disconected. but i havent pulled anyting with it yet. its mostly a snow mover and chopper runner.

thanks for the info.

Jacob

Posted By: Fred in Pa
Date Posted: 07 Jun 2010 at 5:51am

When asking for a D-14 wheel ,they came with 26 inch rears.Sounds like someone went the cheaper way at one time and put WD rear hubs and rim's on it witch are 28's.

There is also a spring that pulls the lever against the block.

Posted By: norm [ind]
Date Posted: 07 Jun 2010 at 8:31pm

we can furnish either 26"[0riginal] 0r 28' need width for matching correctly

1-800-254-3116