Unstyled WF Project
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=133539
Printed Date: 05 Jul 2024 at 8:55am Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Unstyled WF Project
Posted By: ZachD89
Subject: Unstyled WF Project
Date Posted: 08 Jan 2017 at 4:59pm
I recently bought a 1938 WF ser#1044 so I thought id post a picture of the tractor. Also I was wondering if the front end parts and bushings are still available anymore? Thanks Zach
![](uploads/14798/20170108_151327.jpeg)
------------- 37 A,37 Waukesha B,35 WC,38 WF,M crawler,49 WF,49 WD,53 WD45,39 and 40 RC,47 WC,41 B,39 B,48G,48,C,59D10,D21,IB,B10,B12,B208,B1,Roto Bale Loader, sp100 combine, allcrop 66, L3 Gleaner
|
Replies:
Posted By: Rog(NCWI)
Date Posted: 08 Jan 2017 at 6:21pm
I restored a 1937 WF and yes the bushings are still available. They are standard diameter. I had to rebuild the front pivot as that was completely worn out. Had been welded up and ground down to fit which was also worn out. I had a new pin made and resized the hole. Then put a grease fitting in it.
|
Posted By: Gary Burnett
Date Posted: 08 Jan 2017 at 6:31pm
Doing a nice job looks a lot better than it did for sure.
|
Posted By: ZachD89
Date Posted: 08 Jan 2017 at 6:57pm
Ok thanks Rog(NCWI) the grease fitting is a great idea.
------------- 37 A,37 Waukesha B,35 WC,38 WF,M crawler,49 WF,49 WD,53 WD45,39 and 40 RC,47 WC,41 B,39 B,48G,48,C,59D10,D21,IB,B10,B12,B208,B1,Roto Bale Loader, sp100 combine, allcrop 66, L3 Gleaner
|
Posted By: ZachD89
Date Posted: 08 Jan 2017 at 7:00pm
Thanks Gary
------------- 37 A,37 Waukesha B,35 WC,38 WF,M crawler,49 WF,49 WD,53 WD45,39 and 40 RC,47 WC,41 B,39 B,48G,48,C,59D10,D21,IB,B10,B12,B208,B1,Roto Bale Loader, sp100 combine, allcrop 66, L3 Gleaner
|
|