Farm Equipment - WTB B culitvator frame

Print Page | Close Window

WTB B culitvator frame

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=13340
Printed Date: 01 Feb 2025 at 2:47pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WTB B culitvator frame

Posted By: Mark in Iowa
Subject: WTB B culitvator frame
Date Posted: 03 Jun 2010 at 5:39pm

Looking for (in Iowa) a straight "B" cultivator frame, hand lift . I have all the other parts, the frame I have is bent. Thanks, Mark

Replies:

Posted By: GlenninPA
Date Posted: 03 Jun 2010 at 8:15pm

Good luck Mark,about 80% of them have been bent by now....

Posted By: R Aiken
Date Posted: 03 Jun 2010 at 8:53pm

how much or what parts do you need?

Posted By: morton(pa)
Date Posted: 03 Jun 2010 at 9:16pm

I have one that you can have if you come to PA to pick it up.

Posted By: Mark in Iowa
Date Posted: 04 Jun 2010 at 6:25am

I need the frame rails , the tension springs and the brackets that attach the frame to the tractor.

I already have the clamps, shanks and sweeps.

Thanks, Mark

Morton, thanks for the offer I wish I could get out to PA.

Posted By: BurtIA
Date Posted: 04 Jun 2010 at 12:05pm

I believe I have one out back. Are you coming to the Amana AC show on Father's Day? I'm only about five miles from the show ground so you could take a look. Send me a pic of what you need and I'll take a look at what I have.

Burt

Posted By: Mark in Iowa
Date Posted: 04 Jun 2010 at 5:09pm

Thanks Burt,

I live in Cedar Rapids. Maybe I could meet you at your place sometime to see what you have. If I can get a picture for you I will. Where are you located?

Thanks, Mark

Posted By: BurtIA
Date Posted: 04 Jun 2010 at 5:56pm

I'm two miles north of Main Amana. Coming from CR on 151, it's one mile past the Swisher Rd, turn right on 120th Street and it's the 5th place on the right. (3173 120th) 319-350-3889

Posted By: wkpoor
Date Posted: 04 Jun 2010 at 7:17pm

I'm in Ohio but I have a brandy new one still wired from the fractory never has been installed on a tractor.

Posted By: Mark in Iowa
Date Posted: 05 Jun 2010 at 6:25am

Wow, what would you have to have for your NOS frame? If I can figure out a way to get it to Iowa. Is it hand lift? Thanks

Posted By: wkpoor
Date Posted: 05 Jun 2010 at 11:57am

Anyone interested can call me 740-407-6589 Bill