Farm Equipment - More B questions Bill Long or other. And an update

Print Page | Close Window

More B questions Bill Long or other. And an update

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=133276
Printed Date: 12 Nov 2024 at 10:14am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: More B questions Bill Long or other. And an update

Posted By: oldways
Subject: More B questions Bill Long or other. And an update
Date Posted: 01 Jan 2017 at 4:45pm

OK with the parts list from Steve I got the seals I needed and installed also I put in a new oilite bushing in the flywheel and adjusted the pressure plate. Everything's working great. Got that crazy drawbar cut off the back. Found a guy on Craigslist about an hour from home who was selling a woods belly mower and all the brackets for a B. He is also on here some so made a new buddy. Got the new old drawbar installed and the brackets for the belly mower. I'll try and get some pics posted. Also cleaned out the final drives and transmission. Thanks again. For all the help guys.

-------------
1 Corinthians 1:18 1969-190xt-III. 1966 190xt gas. 1966 190xt Cab. 1948-G. 1937-WC unstyled. 1950-B. 1951-CA. 1966-D17-IV

Replies:

Posted By: oldways
Date Posted: 01 Jan 2017 at 4:52pm

Forgot my other question. Not really important just curious. The belly moweri bought came with some spare tractor parts. One of which was a drive shaft. It had a CV or U joint on it and mine does not its just a straight shaft. Just wondering about this. I'm talking about the shaft that runs thought the torque tube.

-------------
1 Corinthians 1:18 1969-190xt-III. 1966 190xt gas. 1966 190xt Cab. 1948-G. 1937-WC unstyled. 1950-B. 1951-CA. 1966-D17-IV

Posted By: PaulB
Date Posted: 01 Jan 2017 at 5:58pm

Some had a joint and some didn't.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY

Posted By: Bill Long
Date Posted: 01 Jan 2017 at 7:44pm

PaulB is correct. I do not have an answer for why though.

Take good care of my favorite. Sounds like you are doing a GREAT JOB!!

Look forward to pictures.

Happy New Year!!

Good Luck!

Bill Long

Posted By: steve(ill)
Date Posted: 01 Jan 2017 at 8:14pm

I think it was a change over the years.... older vs newer.

-------------
Like them all, but love the "B"s.