Farm Equipment - Adjust clutch pedal

Print Page | Close Window

Adjust clutch pedal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=13320
Printed Date: 01 Feb 2025 at 2:50pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Adjust clutch pedal

Posted By: Sitesstables
Subject: Adjust clutch pedal
Date Posted: 03 Jun 2010 at 6:00am

Need to now the proper length or how to adjust the cluct pedal on my WD.. As of now it works but is all the way on the foot rest.. need to know how far out it should be from the foot rest..

Replies:

Posted By: j.w.freck
Date Posted: 05 Jun 2010 at 7:50pm

it should not go all the way to the toe plate.there is a protruding stop on the side of the transmission case that stops the pedal before it reaches the toe plate.the deminsion from the stop is 1/2-to 1 inch before it contacts the throwout bearing.a lot of these stops are broken off...