8010 allis
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=133184
Printed Date: 06 Jun 2025 at 2:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 8010 allis
Posted By: allis power
Subject: 8010 allis
Date Posted: 29 Dec 2016 at 7:28pm
|
On my 8010 I am trying to put on a engine bypass oil filter. I Know they used to a sheet showing how to do it. I am also trying to install water conditioner filter on it. If anyone knows how I would appreciate the help Thanks
|
Replies:
Posted By: DrAllis
Date Posted: 30 Dec 2016 at 12:13pm
|
Save yourself a lot of grief and use good/pre-mixed antifreeze from Cummins or Caterpillar. Coolant filter creates about six more places for a potential leak. Keep it simple....use the right coolant to begin with.
|
Posted By: BigBadAllis
Date Posted: 30 Dec 2016 at 1:26pm
Agree with DrAllis
Heavy Duty coolant come pre-charged with SCA's / DCA's . You do need to check the nitrite levels on occasion to make sure the concentration is at the recommended level. If the levels are low, you will have serious cavitation (electrolysis) cylinder lining pitting etc. The additive prevents the microscopic bubbles that when under pressure implode and actually rip pieces of metal off the liners or block.
The conditioning elements were widely used with the older green coolant that did not have supplemental additives.
Jason
|
Posted By: DrAllis
Date Posted: 30 Dec 2016 at 2:04pm
|
If one would just simply CHANGE the coolant every two years, you'd never need to worry about testing it for proper strength.
|
Posted By: tornado8070
Date Posted: 30 Dec 2016 at 6:17pm
Do you have text capability? I could send you some pics to help you out?
-------------
09’ DT205B, 08’ DT220A, 83' 8070 MFWD, 83’ 8070 85’ 8050 MFWD, 83' 8030, 82' 8010, 85’ 6080 MFWD, 84’ 6080, 79' 7020, 85' M3 RWD, 85' 920 diesel,AC C-50 forklift.
|
|