Farm Equipment - CA cultivators ?

Print Page | Close Window

CA cultivators ?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=13313
Printed Date: 01 Feb 2025 at 11:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: CA cultivators ?

Posted By: Eldon (WA)
Subject: CA cultivators ?
Date Posted: 02 Jun 2010 at 9:55pm

Since it is still raining, I decided to try to mount my (new to me) front cultivators on the CA. I got the depth lever/lift assembly mounted ( a lot of fun by myself), and see that the two plates that the lift cylinder hooks to don't line up....one is rotated about 10-15 degrees forward of the other when the depth levers are in the same position. Nothing looks bent or re-welded...but it seems the plates should be in the same position??

-------------
ALLIS EXPRESS!
This year:

Replies:

Posted By: Dwayne TX
Date Posted: 03 Jun 2010 at 10:04am

Eldon - either email me a picture or post one one here of the parts your working on and I'll send you one of how mine is set up. I've got a manual for the CA cultivators I could refer to, also.

Posted By: Eldon (WA)
Date Posted: 03 Jun 2010 at 6:31pm

Thanks Dwayne....it looks like I am missing the extension that goes from the cylinder to the depth arm assy...could use a pic of that. It would show how it hooks to each side. I used a piece of square tubing slipped over the end of the cylinder and bolted it to each lift tab, but the tubing was too light and bent already...plus I had interference with on of the gangs when I lifted it up. Also need see what the brackets for the rear scratchers look like...I'm missing them also. It looks like they might mount to the drop axles??

-------------
ALLIS EXPRESS!
This year:

Posted By: Eldon (WA)
Date Posted: 04 Jun 2010 at 10:27pm

Built another HD linkage today for the lift cylinder and got that working good....now I just have to get the row spacing set 2" further out (adjusting nuts are rusty and rounded off), and new shovels put on....may do without the scratchers this year...

-------------
ALLIS EXPRESS!
This year: