Follow up to WD45 Final Pan Request - Pic
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=13293
Printed Date: 01 Feb 2025 at 11:56am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Follow up to WD45 Final Pan Request - Pic
Posted By: Jeff(WD45-SATX-TN)
Subject: Follow up to WD45 Final Pan Request - Pic
Date Posted: 02 Jun 2010 at 3:18pm
Has anyone ever seen a bull gear tear into the pan? I assume the spacer on the axle would have to fail?? Maybe the pan got hit, a stump or somehting and it got bent into the gear?? Any input here?
  ------------- 1954 WD45 NF "Iron Tater" |
Replies:
Posted By: allallis2
Date Posted: 02 Jun 2010 at 3:20pm
|
might want to check the snap ring that holds the gears in place. Might be gone or came off. Had that happen one one I worked on, cut a whole all the way through the pan. Found the snap ring just hangin out on the axle. ------------- 1955 G,1938 wc unstyled, 1938 A 1938 B, 1949 G |
Posted By: David Grubb
Date Posted: 02 Jun 2010 at 4:16pm
|
Might be the nut for the inner bearing of the bull gear is coming loose letting the bull gear move outboard. Pop the cap off the final drive housing and take a look.
------------- Dave |
Posted By: FHOliver
Date Posted: 02 Jun 2010 at 8:21pm
| I saw it one time and it was a bearing out |