Pulling Forum - Gleaner E engine

Print Page | Close Window

Gleaner E engine

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=132745
Printed Date: 28 Nov 2024 at 12:05am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Gleaner E engine

Posted By: KevinON
Subject: Gleaner E engine
Date Posted: 17 Dec 2016 at 8:41am

How important is it to have the Gleaner E engine for pulling? Can you build a regular old 226 to the same specs? Thanks.

Replies:

Posted By: DrAllis
Date Posted: 17 Dec 2016 at 9:16am

The Gleaner model "E" or "E-3" is a G-226 engine, already configured at 63 or 67 flywheel HP. You can spend the money on a lower HP W-226 and get the same results, but the G-226 has larger main bearings and a somewhat stronger block to begin with. How much HP do you think you need??

Posted By: KevinON
Date Posted: 17 Dec 2016 at 9:56am

Thanks, Dr. Allis. I wasn't aware of the larger mains and stronger block. I'm not sure what I am going to need, but I will be competing in 3500 and 4500lb open classes at local fairs. Will likely need more cubes.