Farm Equipment - 230 gas sleeve

Print Page | Close Window

230 gas sleeve

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=132272
Printed Date: 23 Aug 2025 at 7:03am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 230 gas sleeve

Posted By: Baldwinm
Subject: 230 gas sleeve
Date Posted: 05 Dec 2016 at 9:34pm

Where can I get a single sleeve for a buda 230 gas engine? Just got one to put in a wd45 diesel frame and one cylinder had water in it that left a nice valley in it. Other cylinders look great. Also are there two different types of sleeves that came in these with or without grooves?

Replies:

Posted By: MACK
Date Posted: 05 Dec 2016 at 9:44pm

All WD45 D had the o rings on sleeve. Later 230s had o rings in block. MACK

Posted By: Norm Meinert
Date Posted: 05 Dec 2016 at 9:46pm

I have 230 gas piston & sleeves. call 815-238-4506 with dimensions

Posted By: Don(MO)
Date Posted: 06 Dec 2016 at 12:10am

I have some used B-230 gas sleeves, they have the O rings in the sleeves.

-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.

Posted By: Baldwinm
Date Posted: 06 Dec 2016 at 6:05am

Okay I'll probably be getting a hold of one of you all once I get this sleeve out to see where the grooves are

Posted By: Matt (Jordan,MN)
Date Posted: 06 Dec 2016 at 10:55am

I have 1 new early 230 gas sleeve kit that needs a new home. Send me a pm if interested. Thanks matt

-------------
Owner of Matt Scott LLC
Specializing in NOS and used Allis Chalmers tractor & implement parts & liturature and Magneto Repair
http://www.mattscottllc.com/

Posted By: Baldwinm
Date Posted: 07 Dec 2016 at 9:06pm

My sleeves have no o ring grooves in them. Grooves are in the block. So does anyone have this style with stock bore?

Posted By: Norm Meinert
Date Posted: 07 Dec 2016 at 9:16pm

I have a new sleeve. call 815-238-4506