D17 Exhaust Manifold Wanted
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=13193
Printed Date: 01 Feb 2025 at 6:54am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D17 Exhaust Manifold Wanted
Posted By: Smiling John
Subject: D17 Exhaust Manifold Wanted
Date Posted: 31 May 2010 at 1:09pm
|
I need an exhaust manifold for a gas D17 series III. There is a large piece broken off where the muffler attaches. Or could I weld on a piece of the proper size black or cast pipe to fix mine?
|
Replies:
Posted By: norm [ind]
Date Posted: 31 May 2010 at 3:08pm
|
we hasve a new manifold in stock [can ship] with the pipe visa master cards
1-800-254-3116
|
Posted By: Coke-in-MN
Date Posted: 31 May 2010 at 3:37pm
Neighbors cracked in same area , He said he was ordering a new one but if I could weld it up until that came , So I welded it with Allstate #8 cast rod. Asked him a year later if he had got new manifold , said no reason to his worked fine with weld repair .
-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
|
Posted By: ChuckLuedtkeSEWI
Date Posted: 31 May 2010 at 6:36pm
|
I was going to buy one for my D17 series 4 as the top part was cracked off right where yours was. I got a threaded pipe fitting and cut to size. As I tried to weld it, the cast was falling apart as I tried to weld as it was really worn and pitted. I ended up brazing it all together and it is holding together sofar. I figured it will work long enough to get all the other things fixed and then as more money comes around, I will buy a new one when I need to.
|
|