OFF COLOR-Ford 4000
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131764
Printed Date: 22 Oct 2025 at 3:39am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: OFF COLOR-Ford 4000
Posted By: TL12A
Subject: OFF COLOR-Ford 4000
Date Posted: 24 Nov 2016 at 9:10am
| Any ideas why all the power steering fluid gets pumped out the vent in the steering gear box? T.I.A |
Replies:
Posted By: DrAllis
Date Posted: 24 Nov 2016 at 10:34am
| I'd guess there's air getting into the system. Does the oil look foamy ?? |
Posted By: DougS
Date Posted: 24 Nov 2016 at 10:41am
Bad seal on the suction side of the pump? |
DrAllis wrote:Posted By: HudCo
Date Posted: 24 Nov 2016 at 11:18am
| yes we did a ford 2600 two months ago , seals in the bottom of the orbit motor are bad that is the cheap part the cause of the prob. will the needle bearing in the bottom will be bad so you will probley have to re cover all of the loose needles, also at least one of the two thrust bearings will be about shot also the upper steering shaft bushing and seals will need to be replaced, otherwise the new seals will not last a day , hardest part of the job is getting the wheel off an the cowling off i think we was about 260 .00 in parts for that job |