Farm Equipment - rear wheel spacing for plowing?

Print Page | Close Window

rear wheel spacing for plowing?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=13159
Printed Date: 01 Feb 2025 at 6:45am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: rear wheel spacing for plowing?

Posted By: Chris WI
Subject: rear wheel spacing for plowing?
Date Posted: 30 May 2010 at 3:45pm

I have a 5-16 semi mount allis plow for behind my 190XT what should the wheel spacing be on the tractor?

Replies:

Posted By: JoeO(CMO)
Date Posted: 30 May 2010 at 3:52pm

what series plow? I may have the info here next to me.

Posted By: CTuckerNWIL
Date Posted: 30 May 2010 at 4:47pm

To make the plow centered behind the tractor, assuming your right wheel is in the furrow, there should be 80 inches between inside of rear tires. I know they usually measure from center of tire to center of tractor or other tire. If you want to measure center to center add the width of one rear wheel to 80 inches.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: Chris WI
Date Posted: 30 May 2010 at 9:02pm

It is a Allis 2000 monoframe with hydraulic auto reset and sidehill hitch.

Posted By: JoeO(CMO)
Date Posted: 31 May 2010 at 4:00pm

Chris, in my 2000 manual for a 5-16 it shows that the measurement from center of tractor to the inside of the furrow wheel should be 30-31 inches. The hillside should be in the exact center of range of travel for normal operation. I hope this helps.

Posted By: CTuckerNWIL
Date Posted: 31 May 2010 at 4:24pm

I guess the plow doesn't get centered then. One bottom will be out past the landside wheel.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF