WD45D
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131589
Printed Date: 06 Feb 2025 at 5:04pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD45D
Posted By: orangereborn
Subject: WD45D
Date Posted: 20 Nov 2016 at 12:13pm
| Where are you getting the correct rubber hose at the injection pump on a WD45D? Thanks...Dale |
Replies:
Posted By: Don(MO)
Date Posted: 20 Nov 2016 at 12:50pm
|
I use low pressure power steering return fittings and fuel hose, makes a nice looking hose and cost is lower.
------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |
Posted By: DougG
Date Posted: 20 Nov 2016 at 12:53pm
| Where do you get a head gasket without going thru Agco ? |
Posted By: Larry in NC
Date Posted: 20 Nov 2016 at 1:05pm
| I bought a valve cover gasket from OKtractor.com. They carry the head gasket also. The Allis number is 74514398. |
Posted By: cwhit
Date Posted: 20 Nov 2016 at 1:08pm
| Tony Carbaugh has them also. |
Posted By: Don(MO)
Date Posted: 20 Nov 2016 at 1:18pm
|
Doug, I have some new head gaskets I don't use that have the fire-rings made into the gasket and don't like to use them and I'd let go. ------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |
Posted By: PaulB
Date Posted: 20 Nov 2016 at 1:27pm
|
I have one of those hoses with my NOS Wd45D parts lot for sale. 
------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: j.w.freck
Date Posted: 22 Nov 2016 at 8:20pm
| have a question for you plow gurus,on a 14 in mold plow,how many horse power per bottom does it take?i have heard several figures and realize that the depth and soil conditions are the key points.....thx |
Posted By: DougS
Date Posted: 22 Nov 2016 at 8:28pm
|
I always figured 12-ish, but your mileage may vary. This is at the drawbar. A WD45 will 4-14s in lighter soil on flat ground. In heavy clay on hilly ground 2-14s will be all it can do. |