Farm Equipment - Difference between Allis 400 and 500 loader

Print Page | Close Window

Difference between Allis 400 and 500 loader

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131422
Printed Date: 22 May 2025 at 6:30pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Difference between Allis 400 and 500 loader

Posted By: WD45
Subject: Difference between Allis 400 and 500 loader
Date Posted: 16 Nov 2016 at 7:54am

Differences between a 400 loader and a 500 loader mounted on a D17.

-------------
Fred Dunlop, G,B,CA, WC,WF, 3 WD45`s,gas, diesel and LP,U,D10 series III, D12,D14,D15 SERIES II,D17 Series IV in Gas and Diesel ,D19 GAS and D21,170 185,210 ,220 an I-600 8070 fwd, 716H and 1920H

Replies:

Posted By: Kcgrain
Date Posted: 16 Nov 2016 at 9:13am

A 500 had longer arms, and a bigger center support than the 400, other than that they are identical.

Posted By: DrAllis
Date Posted: 16 Nov 2016 at 10:15am

The towers are higher on the 500 loader over the 400....probably 3 to 4 inches taller. The 500 loader on a D-17 uses spacer blocks between the side frames, as the 500 fits 180-185-190-200 series which are wider than a D-17.

Posted By: Tracy Martin TN
Date Posted: 16 Nov 2016 at 10:16am

Pretty sure cylinders are a different length between the two also. Tracy

-------------
No greater gift than healthy grandkids!