bearing
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=13131
Printed Date: 01 Feb 2025 at 5:41am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: bearing
Posted By: bs5230
Subject: bearing
Date Posted: 29 May 2010 at 8:10pm
| i was trying to find where to get a new bearing, it goes on the transmission end of the shaft that goes through the hand clutch- it has a big snap ring on it, the bearing itself goes into the houseing of the trans this is on a 1951 wd |
Replies:
Posted By: steve(ill)
Date Posted: 29 May 2010 at 8:16pm
|
you can probably buy thru local AGCO dealer or on line AGCO, but the cheapest way is to order from Motion Industiries or Bearing Supply house, etc.. There should be a number on the bearing race and manufacturer such as SKF, FAG, etc. The bearing is not specific to the WD. Most bearings are generic.. In a pinch i have gone to NAPA auto store and they will order it. ------------- Like them all, but love the "B"s. |
Posted By: bs5230
Date Posted: 29 May 2010 at 8:25pm
| i looked all over the bearing and did not find any numbers or letters at all, i will try to find it on one of the sites- i could not find it in the I T manual either |
Posted By: steve(ill)
Date Posted: 29 May 2010 at 8:35pm
|
sorry, i donthave a parts book for the WD-- maybe soneones has the number. ------------- Like them all, but love the "B"s. |
Posted By: Dave(inMA)
Date Posted: 29 May 2010 at 10:25pm
|
Try taking it to your local bearing shop - if it's more or less in one piece they can measure it and get you going. ------------- WC, CA, D14, WD45 |
Posted By: ac612bill
Date Posted: 29 May 2010 at 11:00pm
I have several nos bearings I can look through but I need to know if your serial No. is before or after serial number 127007. I have the one pictured #224837 for the tractors before #127007
|