Farm Equipment - Shifter needs rebuilt 37 WC

Print Page | Close Window

Shifter needs rebuilt 37 WC

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131293
Printed Date: 22 May 2025 at 6:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Shifter needs rebuilt 37 WC

Posted By: psheridan
Subject: Shifter needs rebuilt 37 WC
Date Posted: 13 Nov 2016 at 3:58pm

In the act of rebuilding my 37 WC

the shifter is really loose, I would like to tighten up the wobble in the gearbox

Is this a big project?

thanks

Paul

Replies:

Posted By: JoeM(GA)
Date Posted: 14 Nov 2016 at 5:49pm

You will have to remove the shifter assy, disassemble the reverse lockout then remove the shift lever. Then you can check the groove in the shift lever and the pins in the tower and assess what all has worn- the holes in the tower, the pins, and the lever. Oversize pins are available, but if the groove in the shifter is worn you will have to have it filled and re-machined.

-------------
Allis Express North Georgia
41 WC,48 UC Cane,7-G's,
Ford 345C TLB