All crop 66 corn head
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=130401
Printed Date: 24 Apr 2025 at 1:18am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: All crop 66 corn head
Posted By: AllisandGleaner
Subject: All crop 66 corn head
Date Posted: 24 Oct 2016 at 7:41pm
| Need help finding out how a corn head hooks up in place of the grain head pics would be perfect |
Replies:
Posted By: DennisA (IL)
Date Posted: 24 Oct 2016 at 8:38pm
|
The corn head mounts and pivots at the same place as the grain head.
The drive for the head is a PTO shaft that attaches to the shaft at the end of the gearbox.
------------- Thanks & God Bless Dennis |
Posted By: AllisandGleaner
Date Posted: 24 Oct 2016 at 9:05pm
| Well I'm not sure if I have all my parts |
Posted By: Joe Graunke
Date Posted: 24 Oct 2016 at 9:14pm
|
Do you have the feeder house? Joe ------------- |
Posted By: DennisA (IL)
Date Posted: 24 Oct 2016 at 10:40pm
|
There are a lot of parts that get added when you switch over to a corn head. I min of 2 dozen parts.
------------- Thanks & God Bless Dennis |
Posted By: AllisandGleaner
Date Posted: 26 Oct 2016 at 6:12am
| Are you there any parts for sale for them |
Posted By: Chad (MN)
Date Posted: 26 Oct 2016 at 12:47pm
|
Sorry I don't have more pictures right now but here is a top look at the head on a 66. We took the corn head off a different machine and installed it on this combine. You need: the sheet metal for the throat to dump the corn into the cylinder, some braces to accommodate the added stress from the weight, switch the entire cylinder assembly from one machine to another if possible (saves taking one apart & putting it back together), and some additional stuff like different concave bars & pan liner, canvas curtain behind cylinder above straw rack, stalk protection plate under the clean grain elevator, and heavier spring loaded lift mechanism. There are only two pivot bolts that hold the header to the combine but there are many other pieces that would need to be switched.  ------------- 220 3-190XT 2-D19d D19g 5-D17 UC 3-WC 2-WD 3-WD45 CA C H3 7-AllCrops 14-plows 3-Gleaners Lawnmowers SC-equipment |
Posted By: DennisA (IL)
Date Posted: 26 Oct 2016 at 10:55pm
|
Here are a few pictures. This is the parts to mount the head. http://s161.photobucket.com/user/caallis/media/All-Crop%20with%202%20Row%20Cornhead/IMG_0813_zpswzfnpbme.jpg.html" rel="nofollow"> 
http://s161.photobucket.com/user/caallis/media/All-Crop%20with%202%20Row%20Cornhead/IMG_0814_zpsrfombrhz.jpg.html" rel="nofollow">  This shows where the part attaches to the corn head. http://s161.photobucket.com/user/caallis/media/All-Crop%20with%202%20Row%20Cornhead/IMG_0815_zpsogjzv9wd.jpg.html" rel="nofollow">  Bracing http://s161.photobucket.com/user/caallis/media/All-Crop%20with%202%20Row%20Cornhead/IMG_0818_zpspgaa5gao.jpg.html" rel="nofollow">  http://s161.photobucket.com/user/caallis/media/All-Crop%20with%202%20Row%20Cornhead/IMG_0819_zpswaeawied.jpg.html" rel="nofollow">  http://s161.photobucket.com/user/caallis/media/All-Crop%20with%202%20Row%20Cornhead/IMG_0822_zpsopiyoyte.jpg.html" rel="nofollow">  PTO shaft to the head http://s161.photobucket.com/user/caallis/media/All-Crop%20with%202%20Row%20Cornhead/IMG_0821_zpsd65d5xgx.jpg.html" rel="nofollow">  http://s161.photobucket.com/user/caallis/media/All-Crop%20with%202%20Row%20Cornhead/IMG_0820_zpsarbeu0db.jpg.html" rel="nofollow">  Tailings sieve http://s161.photobucket.com/user/caallis/media/All-Crop%20with%202%20Row%20Cornhead/IMG_0816_zpssm0o5old.jpg.html" rel="nofollow">  http://s161.photobucket.com/user/caallis/media/All-Crop%20with%202%20Row%20Cornhead/IMG_0817_zpsybatwls1.jpg.html" rel="nofollow">  ------------- Thanks & God Bless Dennis |
Posted By: AllisandGleaner
Date Posted: 27 Oct 2016 at 6:33am
| Would it be possible for someone to make copies of that stuff |
Posted By: DennisA (IL)
Date Posted: 27 Oct 2016 at 7:38am
|
What all do you need? Do you have the cylinder bars and concave bars? they are different as well. Also the concave insert is needed to beef up the concave as well as 2 extra pieces of angle iron under the concave.
------------- Thanks & God Bless Dennis |
Posted By: AllisandGleaner
Date Posted: 27 Oct 2016 at 6:25pm
| I will be honest all I have is the corn head and that's it. |
Posted By: DennisA (IL)
Date Posted: 27 Oct 2016 at 11:30pm
That's a ruff deal. Any way you could get parts from where you got the head?
------------- Thanks & God Bless Dennis |
AllisandGleaner wrote:Posted By: AllisandGleaner
Date Posted: 28 Oct 2016 at 6:06am
| I bought the head from an old man where I got it from it had not moved for 40 plus years. I asked if he had the redder house shout and he said what I hot was all he got when he bought it. |
Posted By: DennisA (IL)
Date Posted: 29 Oct 2016 at 9:59am
Make the parts to mount the head should be easy. If you can find a PTO with a smaller I.D. you can take it to a machining shop and have them thread it. The feeder house is just sheet metal that is supported with angle. May not be factory but can get it working. ------------- Thanks & God Bless Dennis |
Posted By: AllisandGleaner
Date Posted: 29 Oct 2016 at 7:14pm
| That might work only if I had one to go by |