Farm Equipment - Does a D15 Crank pulley come ready for hyd. pump

Print Page | Close Window

Does a D15 Crank pulley come ready for hyd. pump

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=13018
Printed Date: 01 Feb 2025 at 12:45am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Does a D15 Crank pulley come ready for hyd. pump

Posted By: ChuckLuedtkeSEWI
Subject: Does a D15 Crank pulley come ready for hyd. pump
Date Posted: 27 May 2010 at 6:22am

Sold the loader off of my D15 complete with the hyd. pump that runs off of the crank pulley. Was wondering if the pulley that comes on a d15 has the bolt hole locations for the hyd. pump shaft already or is that something that had to be changed when putting a loader with live hyd. pump on? Just trying to find out for the new owner so that I know if we have to swap crankshaft pulleys or not. Thanks for any help.

Replies:

Posted By: FredW
Date Posted: 27 May 2010 at 6:55am

The pulley is drilled and tapped for adapter to drive pump. Fred

Posted By: FredW
Date Posted: 27 May 2010 at 6:58am

I should also mention you can purchase a new adapter easier than remove yours and if you need a name for the company I have it somewhere. Fred

Posted By: ChuckLuedtkeSEWI
Date Posted: 27 May 2010 at 8:44am

Thanks Fred. If you have that info, that would be great. I told the new owner it might be a good idea to put new rubber grommets by the hyd. pump as well as long as it is apart. Might be able to get them from the same place