Allis B - aftermarket rockers?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=128801
Printed Date: 22 Nov 2024 at 12:48am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis B - aftermarket rockers?
Posted By: 00transamnh
Subject: Allis B - aftermarket rockers?
Date Posted: 15 Sep 2016 at 12:27pm
Hey Folks,
I'm new to the forum and have done a lot of 'googling' on the subject but I can not find what I am looking for.
I have a 1940 Model B that I am restoring for my grandfather and in the process of rebuilding the engine have discovered that the rocker shaft and rockers are toast. Does anyone make a reproduction or aftermarket alternative to these assemblies? Am I stuck gambling with used EBAY parts?
Any help would be greatly appreciated.
|
Replies:
Posted By: JimD
Date Posted: 15 Sep 2016 at 12:38pm
|
No aftermarket made. But there are plenty of trusted vendors here on the forum that will sell you the parts and stand behind them. 877-378-6543
-------------
Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central.
We have new and used parts. 877-378-6543
|
Posted By: Ken in Texas
Date Posted: 15 Sep 2016 at 2:22pm
Used USEABLE rocker arm assemblies are quite plentiful. Post a Wanted in the classified section of this forum and see what pops up from individuals with a stash of used engine parts.
I will have a look see myself in my stash of stuff. Ken
Call Jim D for sure.
|
Posted By: WF owner
Date Posted: 15 Sep 2016 at 6:49pm
|
I thought I saw an after market rocker set in the pulling section a while back. I believe they were blue and not terribly expensive.
|
Posted By: Hubert (Ga)engine7
Date Posted: 15 Sep 2016 at 8:19pm
Plus 1 on what Jim D said. He and the other vendors on this Forum stand behind their parts. I have never had a problem with anything I bought from him. And welcome to the Forum, you will be able to get a lot good information ans assistance on here.
-------------
Just an old country boy saved by the grace of God.
|
Posted By: j.w.freck
Date Posted: 15 Sep 2016 at 9:09pm
|
oootransamnh....have a c for sale complete 4 brand new tires good tin.getting to old to fool with it.j.w.freck 903-930-1387
|
Posted By: 00transamnh
Date Posted: 29 Sep 2016 at 9:16am
|
Jim hooked me up with a used set. Thanks guys.
|
Posted By: Gerald J.
Date Posted: 29 Sep 2016 at 9:44am
I turned a new rocker arm shaft for my MF-135 on my metal lathe and cut 7/16 threads in the ends to plug them with steel set screws instead of corks that will eventually rot and wreck the rocker arms. Then I had a machine shop grind to the final diameter with a better finish than the turning. The bushings in the rocker arms were steel backed and badly worn from running dry. I couldn't buy them so I bought solid bronze and bored to fit and pressed them in. At the time I did that Central Tractor offered rebuilt rocker arms and shaft.
Gerald J.
|
|