Farm Equipment - CA Parts Catalog

Print Page | Close Window

CA Parts Catalog

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=128694
Printed Date: 28 Sep 2025 at 5:11pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: CA Parts Catalog

Posted By: Charlie175
Subject: CA Parts Catalog
Date Posted: 13 Sep 2016 at 6:52am

Does anyone have access to the CA parts Catalog?

I'm looking to see what rear tire/wheel options were available through 1957

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Replies:

Posted By: Ken in Texas
Date Posted: 13 Sep 2016 at 7:05am

Power adjust rims were the norm. I too am curious what the book says about optional rim widths. I would imagin they would cover the CA high crop cane version option wheels and rims in the parts book

Posted By: Charlie175
Date Posted: 13 Sep 2016 at 7:11am

I'm running 11.2x24 now. My club will allow 1 size up. So that would be 12.4? or 13.6?

I don't want to spend the $50 on a parts catalog only to find out it lists 10x24 only....

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Posted By: CTuckerNWIL
Date Posted: 13 Sep 2016 at 7:23am

I'd be interested to see a list too. Dad said he used the CA one spring and took it in to have 13-24's(14.9 in todays size) put on it. They were still on it when I got it from him. He said the original tires let it sink too much when trying to disc plowed ground.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: PaulB
Date Posted: 13 Sep 2016 at 7:34am

The parts book only lists the standard PAW rim assembly. No size given (although it's a 10X24 rim) The tire size is listed as 10-24 (new size 11.2X24), so one size bigger is 12.4X24. I have some 12.4X24 tires here if you'd like to come take a look.

I went through the same thing many years ago. I do know that a "cane" tractor had 36" rear rims welded onto the standard 24" rim and I think that the tire size was either a 9.5X36 or 11.2X36. I was never able to find any printed documentation. I was able to get the local club at that time to OK the listing from the D10/12 specs to allow me to run the 36" tires. I also have that set of rims available.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY

Posted By: Charlie175
Date Posted: 13 Sep 2016 at 7:49am

Agco parts only lists the 10x24 rim.

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Posted By: Ken in Texas
Date Posted: 13 Sep 2016 at 8:19am

Running anything bigger than a 12.4 on a 10 inch rim is pushing it. I went with 11 inch rims running 13.6 rubber on my CA. That is the same combination rim and tire that came on my MF 1260 compact new.