Farm Equipment - b allis hub center nut

Print Page | Close Window

b allis hub center nut

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=128335
Printed Date: 01 Oct 2024 at 5:02pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: b allis hub center nut

Posted By: wkiheri
Subject: b allis hub center nut
Date Posted: 05 Sep 2016 at 10:48am

does anyone no how much torque you can put on the center nut hub of a b allis I have tightened it with a least 100 foot lbs and the hub is still a little bit loose or do I have to add another shim washer between the nut and the lock washer

Replies:

Posted By: Leon n/c AR.
Date Posted: 05 Sep 2016 at 11:00am

If you are talking about the rear wheel center nut you should not need shims unless it has been run loose and wallowed out the splines on the stub axle and hub. At this point you could try a shim but I do not believe it will help also you probably could use 200 ft.lbs torque o.k. Leon

Posted By: wkiheri
Date Posted: 05 Sep 2016 at 11:06am

Ok, thanks I was afraid of that. Do you think it will to run it a little bit loose

Posted By: wkiheri
Date Posted: 05 Sep 2016 at 11:06am

Posted By: wkiheri
Date Posted: 05 Sep 2016 at 11:07am

i forgot the word loose

Posted By: wbecker
Date Posted: 05 Sep 2016 at 11:49am

Don't run it a little loose, it will get worse.
Use a Big washers or whatever it takes to get it tight.

-------------
Allis B, IB, Low B, G, D10, JD M, 8KCAB, C152