7040 hydraulics
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=128122
Printed Date: 24 Nov 2024 at 9:52am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7040 hydraulics
Posted By: one54dodgetruck
Subject: 7040 hydraulics
Date Posted: 31 Aug 2016 at 10:35pm
I have a 7040 PD without the 3 hydraulic pumps (they were gone when i got it). Has anyone used a single pump, or different setup?
-------------
2 WDs
B
B112
D14
D15 shuttle
180
185
7040
Hd7w
D14
D15
185
7040 pd
|
Replies:
Posted By: DrAllis
Date Posted: 01 Sep 2016 at 10:34pm
|
Pump #1 is the gerotor pump and makes the transmission clutch and brake work. Pump #2 is for the power steering, rear end lubrication and charging of the main pump. It is also a structural component of pump #1. Pump #3 is the main hydraulic pump and also provides for the power brakes. I suppose you could mount a double-pump on the engine (there's not a place to do that without engine changes) and you'd have to figure out how to provide 15 GPM to the transmission circuit and then 5 GPM to the power steering circuit, etc. Remember each circuit draws oil from a different reservoir, and then there's a matter of plumbing this new system. Just find the correct hydraulic pump that bolts right into place and works like it's intended to.
|
|