Farm Equipment - WD Shifter Question

Print Page | Close Window

WD Shifter Question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=12797
Printed Date: 31 Jan 2025 at 6:03pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD Shifter Question

Posted By: HayMaker
Subject: WD Shifter Question
Date Posted: 22 May 2010 at 3:04pm

I just bought a WD today with a 2 row cultivator, but something is screwed up in the shifter. When I went to take it out of reverse, the shifter popped loose and now it just flops around. When it came loose it went into 3rd gear. Is there a roll pin in there that I broke or is it something else? Thanks

Replies:

Posted By: Bill Long
Date Posted: 22 May 2010 at 4:05pm

Hi, It is important to know if this is a WD or wd-45 - the shifter is curved.

Take a good look at what you have then get back to us.

It could be as simple as a problem with the shifter.

Good Luck!

Bill Long

Posted By: HayMaker
Date Posted: 22 May 2010 at 9:12pm

It's a WD, it runs pretty good, has a crack in the exhaust manifold though and the body is pretty rough, but it doesn't smoke and with some fresh gas, we had it running pretty good, but the shifter popped out backing it off of the trailer, and not it seems like its not engaging the shift rods.