WD Spinout wheel eccentrics
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=127094
Printed Date: 15 Sep 2025 at 11:50pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD Spinout wheel eccentrics
Posted By: WDDave
Subject: WD Spinout wheel eccentrics
Date Posted: 11 Aug 2016 at 1:17pm
Anyone ever try to look for spinout wheel eccentric blocks?
Just the blocks, I am missing a couple so I was going to make them then discovered they are hardened and didn't have time to order tool steel to make and harden them.
Got a price on new ones $85.00 each (Ouch)
The same place said used ones would be half that price each (WHAT?)
Is this the norm for these since they are hardened?
Couldn't find any aftermarket either.
-------------
WD ,wide front, with loader
|
Replies:
Posted By: Dakota Dave
Date Posted: 11 Aug 2016 at 1:58pm
|
I was missing one on my CA when it took it apart. I got a piece off key stock I think it was 3/8" or 1/2". Ground out the curved slot with a 4 1/2" grinder and put it back together. I later bought a couple from an old allis place but haven't put it in yet. That was at least 15 years ago. It only took a few minutes with a grinder to shape it pretty much correctly. The local John Deere dealer has large key stock on hand all the time, I've used it for other things and I dought it'll ever wear out.
|
Posted By: jaybmiller
Date Posted: 11 Aug 2016 at 3:07pm
I've got a bucket or two of D-14 rim parts here, are they the same ??
Jay
-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
Posted By: JimD
Date Posted: 11 Aug 2016 at 5:15pm
I sell used ones for $15. But I think I remember Tony's tractors had new reproduction.
-------------
Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central.
We have new and used parts. 877-378-6543
|
Posted By: john(MI)
Date Posted: 11 Aug 2016 at 6:27pm
I got one that was left over after I did my D14 rims! Nope can't figure that one out either!! Anyway if I can find it I can mail it to you. Maybe you could send me a buck or two for postage. Let me know. PM me.
When I was working on my rims I thought I may need to replace some parts. There was quite a few spin out parts on Ebay.
-------------
D14, D17, 5020, 612H, CASE 446
|
Posted By: j.w.freck
Date Posted: 11 Aug 2016 at 9:10pm
|
I have at least 20-30 of them.call me 903-930-1387
|
Posted By: WDDave
Date Posted: 11 Aug 2016 at 9:32pm
Thanks guys,
I picked up a couple used ones today they are rough but will due for now.
A couple of you mentioned using keystock that's a good idea.
JimD you are right Tonys tractors has new reproduction for $12.00
I couldn't buy the matl and make them for that just wonder if they are hardened?
I have an old Allis dealership down the road from me but I see I really have to watch their prices they treat what they have like gold.
-------------
WD ,wide front, with loader
|
|