Farm Equipment - New Agco 6060 tach questions \ problems

Print Page | Close Window

New Agco 6060 tach questions \ problems

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=12671
Printed Date: 31 Jan 2025 at 1:49pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: New Agco 6060 tach questions \ problems

Posted By: DougG
Subject: New Agco 6060 tach questions \ problems
Date Posted: 19 May 2010 at 4:07pm

Anyone ever get a new tach for a 6060 AC from AGCO? It was an unbelievable $198 !!! Now - how do you hook it up for the hourmeter to work ? It has a B+ term ; a NEG term. and a SIG. term on the tach ; the tractor has 2 reds , 2 blks. , and a brn. sig. wire ; on the tach it has an A and an hourmeter sign printed in the plastic but no studs sticking out to hookup any wires ; looks like it needs a stud to hook a hot wire to where the little numbers and hole where hourmeter should hookup ;on the instructions it has the studs shown ; it a BEEDE brand ; if no answers Ill cal them in the morning ; other than that the tach works , but I dont think its perfectly accurate

Replies:

Posted By: DougG
Date Posted: 20 May 2010 at 9:13am

Got it figured out - my fault - on this new tach the engine has to run 6 minutes to register a 1-10 of an hour ; had it running but not 6 minutes; the old one the hourmeter clicked- or worked after 30 seconds ; i was waiting for the 30 sec. click ; Beede has a great tech support- problem solving forum - and they,ll get you going !!