190 Foot throttle
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=125942
Printed Date: 03 Oct 2025 at 10:30pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 190 Foot throttle
Posted By: Charlie175
Subject: 190 Foot throttle
Date Posted: 15 Jul 2016 at 5:33am
|
Did anyone ever make one? I find them Handy to have. ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Replies:
Posted By: Brian F(IL)
Date Posted: 15 Jul 2016 at 8:20am
| On Allis-Chalmers farm equipment tractors, I only ever saw an OEM foot accelerator on a D-21. I'm sure there were industrial tractor applications that may have had OEM foot accelerators (or decelerators). |
Posted By: Charlie175
Date Posted: 15 Jul 2016 at 8:23am
|
I used a 6080 with loader for years with a foot throttle and loved it. Very Handy I was hoping to add one to my 190. Might have to fabricate something with a double action cable ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: Lonn
Date Posted: 15 Jul 2016 at 8:49am
------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Brian F(IL) wrote:Posted By: tbran
Date Posted: 15 Jul 2016 at 9:14am
|
918 industrial had them -ind 190, ,,,, sure they are NLA
------------- When told "it's not the money,it's the principle", remember, it's always the money.. |
Posted By: Charlie175
Date Posted: 15 Jul 2016 at 9:18am
|
Drat. 918 not on AGCOparts. Wanted to see a diagram ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: Charlie175
Date Posted: 15 Jul 2016 at 9:22am
|
I looked at the 7000 foot control and it works with the dash lever. 918 probably was the same way. I'll have to think about a setup with the console control ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: CAL(KS)
Date Posted: 15 Jul 2016 at 9:40am
|
minnpar has a 918 manual foot throttle on pg 77 of pdf here is the direct link to pdf http://www.minnpar.com/partbooks/BACKHOE%20MANUALS/ALLIS%20CHALMERS%20BACKHOE%20MANUALS/918%20PM%20%231008929.PDF" rel="nofollow - http://www.minnpar.com/partbooks/BACKHOE%20MANUALS/ALLIS%20CHALMERS%20BACKHOE%20MANUALS/918%20PM%20%231008929.PDF
------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: Lonn
Date Posted: 15 Jul 2016 at 9:46am
|
Page 77
------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Posted By: lowell66dart
Date Posted: 15 Jul 2016 at 9:52am
|
160's and 6040's had them too. ------------- AC 6080 (8030,7060,200,175,D-17HC, 6040,160,6140 all gone) Farmall 1066 & 656 Hi-Clear (for sale), White 2-62 High Clearance, JD 4255 Hi Clear. |
Posted By: JayIN
Date Posted: 15 Jul 2016 at 6:48pm
|
Did the Beachmaster have a foot throttle? ------------- sometimes I walk out to my shop and look around and think "Who's the idiot that owns this place?" |
Posted By: CrestonM
Date Posted: 15 Jul 2016 at 6:52pm
IB's had a foot throttle. Probably could be adapted to a B fairly easily.
|
Posted By: Auntwayne
Date Posted: 15 Jul 2016 at 11:00pm
|
5040 had them, but, because of the short wheel base........all you got was full throttle, zero throttle, full throttle, zero throttle etc, etc, etc. Very useless on smaller tractors. Your foot just bounced up and down on anything that jarred the tractor.
------------- Dad always said," If you have one boy, you have a man. If you have two boys, you have two boys". "ALLIS EXPRESS" |
Posted By: 8050/8030/185
Date Posted: 15 Jul 2016 at 11:47pm
| Don't know if it was factory or option but my Maroon belly 7000 had a foot throttle. Also the dash throttle. My 7020 did not have that. Many differences of the Maroon 7000 and black 7020. |
Posted By: Fred in Pa
Date Posted: 16 Jul 2016 at 7:35am
|
Sounds like a time to build one .then u can sell some . ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
Posted By: Charlie175
Date Posted: 18 Oct 2021 at 7:25am
|
Only took me a few years to get around to doing this! :) It works. Phase 1 product development! https://youtu.be/WB7A8BLpl6Y" rel="nofollow - https://youtu.be/WB7A8BLpl6Y ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: DougG
Date Posted: 18 Oct 2021 at 6:21pm
| Theres a way to do it - ive seen a few where the foot throttle over rides the hand throttle- it take some welding of -stops - on the rod that goes to the injector pump but was actually very simple ; the Fiat built Allis tractors were one step ahead ! |
Posted By: AC720Man
Date Posted: 18 Oct 2021 at 8:21pm
|
Nice work Charlie. Looks like it works well. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: darrel in ND
Date Posted: 19 Oct 2021 at 2:19pm
| That's sweet, Darrel |
Posted By: DougG
Date Posted: 19 Oct 2021 at 7:28pm
| Real nice Charlie , looks like it works great |
Posted By: AC720Man
Date Posted: 19 Oct 2021 at 9:39pm
|
Time for my XT to get one, after all they are sisters....lol.ok,how much is it gonna cost big brother? ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: Charlie175
Date Posted: 20 Oct 2021 at 6:01am
|
I'll get you set up. ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: Dusty MI
Date Posted: 20 Oct 2021 at 9:04am
|
I drive my D-10 series III on tractor caravans. I've often thought making a foot throttle/ accelerator, for it, and wondered if it wood be the effort ? ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: Charlie175
Date Posted: 20 Oct 2021 at 12:52pm
|
That style of tractor would be harder to do, but probably possible. ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |