Pulling Forum - 7030 2 speed

Print Page | Close Window

7030 2 speed

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=125592
Printed Date: 24 Nov 2024 at 10:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7030 2 speed

Posted By: Boldt220
Subject: 7030 2 speed
Date Posted: 08 Jul 2016 at 11:57am

Anyone have any idea if you can beef the two speed button shift with the power directors I wanna use it at around 500 hp.

Replies:

Posted By: DougG
Date Posted: 08 Jul 2016 at 5:21pm

If it were mine I would not use it /shift it unless definitely needed

Posted By: Boldt220
Date Posted: 08 Jul 2016 at 5:58pm

Can you do anything to of like a t/a on an ih. We have messed with 220 and d21's but never one of these. We have a timed pull around us were they don't add much weight to the sled and it's how fast you go between the two timers. They have found a way to get the dual power and t/a and the over unders in the Oliver's to hold I would think you could do the same with that

Posted By: timmypuller
Date Posted: 17 Aug 2016 at 3:30pm

The problem with a power director trans is there's a neutral in between the speeds. If there's a way to adjust our the neutral you should be able to shift

Posted By: DrAllis
Date Posted: 17 Aug 2016 at 3:52pm

It can be done. Starting with a 7580 clutch assembly is a good idea, as there are more discs in low and high. Torque limiter has to be bolted solid someway is the first step.