Pulling Forum - rocker arm shaft

Print Page | Close Window

rocker arm shaft

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=125150
Printed Date: 17 Feb 2025 at 3:26pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: rocker arm shaft

Posted By: Jersey Walt
Subject: rocker arm shaft
Date Posted: 28 Jun 2016 at 2:49pm

I am looking for help. I need rocker arm shaft for CE engine #213262, a new one (no wear) and a set of rocker arms - intake and exhaust #209861 new (8 arms) or a means to rebush rocker arms. Has anyone used cast iron piston bushings #207442 to rebuild rocker arms. And where my I find these bushings. Thanks

Replies:

Posted By: Bill_MN
Date Posted: 03 Jul 2016 at 2:10pm

Would think one could make the shaft fairly easily, just some thick walled tube and drill the oil holes based off the original one, pretty simple part. Unless you find NOS or get aftermarket rockers for another engine and retrofit you won't find new parts.

-------------
1951 WD #78283, 1918 Case 28x50 Thresher #76738, Case Centennial B 2x16 Plow