Construction and other equipment

Print Page | Close Window

H3 track rollers

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=124532
Printed Date: 05 Oct 2024 at 5:30pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: H3 track rollers

Posted By: badtrack
Subject: H3 track rollers
Date Posted: 13 Jun 2016 at 3:27pm

Hi back on the 1964 H3 carriage. Looks like I may be in need of up to 5 new bottom track rollers. The well worn ones are Berco 1388. Does anyone know where I may search for them or seals and bushings?

Replies:

Posted By: Josh H
Date Posted: 14 Jun 2016 at 8:51pm

Might not be available but call berco. I think I've bought direct before

Posted By: badtrack
Date Posted: 15 Jun 2016 at 4:15pm

Thanks Josh. I think I may have found so used ones but expensive.

Posted By: arichi55
Date Posted: 22 Jun 2016 at 6:31am

Try industrial tractor supply

Posted By: ac-mike
Date Posted: 23 Jun 2016 at 8:07am

If you have, or have access to the tools you can rebuild them. Strip them down, build up rollers by welding and turn back to specs. Time consuming but works. Make sure you have the necessary parts for reassembly before doing this much machining.

Posted By: badtrack
Date Posted: 29 Jun 2016 at 7:54pm

I found some Berco 2163 rollers. After installing the rear rollers on a worn undercarriage I found the sprocket digging into the roller! The center diameter of the 2163 is 3/4 inch larger than the old 1388 roller. Any idea of the easiest fix??