Print Page | Close Window

611 hydro belt help

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=124413
Printed Date: 30 Nov 2024 at 5:27am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 611 hydro belt help
Posted By: cbr_fx4
Subject: 611 hydro belt help
Date Posted: 10 Jun 2016 at 9:44pm
I'm having trouble finding a deck belt for my 611 hydro. The old one shredded so it is of no help. The sticker under the hood says it is a 2087732 which is a 78 inch belt. It so happens that is what my 919 and 917 take to run the deck so I tried it. It is a mile too long. I have a manual and it is routed right. I went to Napa and got a 70 inch one and it is still too long. Just wondering if anyone else has been through this. If not I will keep getting shorter ones till it works. It's just a pain to drive 16 miles round trip to Napa. Thanks fellows



Replies:
Posted By: Gary in Texas
Date Posted: 11 Jun 2016 at 3:45am
My book calls for part #71670835-9


Posted By: cbr_fx4
Date Posted: 11 Jun 2016 at 7:44am
I looked it up and that is a 78.5 inch belt so I don't think that's it either.


Posted By: Steve in NJ
Date Posted: 11 Jun 2016 at 8:33am
Are you sure you're routing the belt correctly? Maybe the routing of the belt differs from the pic in your manual. Two belts coming up within a 1/2" of one another seems to be awful coincidental. Better double check. Some of the belts in some of these applications route all Kookie. No wonder that shred after a while....  LOL!


-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife


Posted By: ac89
Date Posted: 11 Jun 2016 at 7:48pm
I am having the same problem. I bought the belt that it calls for and it's way to big.


Posted By: cbr_fx4
Date Posted: 11 Jun 2016 at 9:22pm
Well I did figure out that it goes on different than my book says, might be because mine is a deutz book. But the one it calls for is still a mile too long. I put a 68 inch one on that I had and it works but is too tight and the mower won't disengage. I still have the 70 inch and will try routing that right and it should be about right.


Posted By: cbr_fx4
Date Posted: 12 Jun 2016 at 8:06am
I figured it out a 70 inch works great I won't forget this anytime soon if anyone else has trouble.


Posted By: Rod in MN
Date Posted: 12 Jun 2016 at 1:42pm
Hi Let me go out to shop and get the number I used

Rod in MN


Posted By: Rod in MN
Date Posted: 18 Jun 2016 at 10:18am
HI  The Simplicity part number I found is 1670835sm. That's one I use

I'm working on restoring a AC 611 LTD Hydro right now got it all clean and primed got some orange on now working on putting it back to gather
Just finishing up a 611LTD 5 speed  just need to wet sand and buff the hood out then put hood decals on and put mower deck on and Done

I'm Looking for a 611 LTD 3 speed close to central Minn.  Then I would have all 3 of that model
Thanks
Rod in MN


Posted By: ac89
Date Posted: 18 Jun 2016 at 11:48am
Rod where do you get decals for the 611 Ltd 5spd? Mine are faded but the paint is like new.


Posted By: Rod in MN
Date Posted: 18 Jun 2016 at 9:54pm
HI, ac89, I had all of mine made at a local sing shop that has been maintaining a proof folder for all they have duplicated for me and others.

Rod


Posted By: ac89
Date Posted: 02 Jul 2016 at 7:30am
OK thanks I'll check with my local sign shop



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net