WD 45 Wide Front Value
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=124008
Printed Date: 18 Sep 2025 at 5:01am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD 45 Wide Front Value
Posted By: Gary Burnett
Subject: WD 45 Wide Front Value
Date Posted: 01 Jun 2016 at 12:04pm
|
What sort of price is a WD45 wide front bringing these days? |
Replies:
Posted By: WF owner
Date Posted: 01 Jun 2016 at 2:25pm
|
It's very hard to say without more info. Is it all original or restored. How is the sheet metal? How much wear on the pedals? Does the engine run smooth with no smoke? Do the PTO and hydraulics work as they should? Assuming an original, good running tractor with decent rubber, good rear rims and everything in order, my guess would be somewhere between $1400 and $1800 in our area. |
Posted By: Rick
Date Posted: 01 Jun 2016 at 2:29pm
|
I was thinking that he might be talking about just the WD45 wide front end itself...maybe? Rick
|
Posted By: VFDfireman
Date Posted: 01 Jun 2016 at 3:49pm
I was thinking the same thing. If that's the case, a low wear 4 bolt will bring $250 easy. A three bolt will (if not beat up) will be much less. That would be prices minus tires in my area. |
Rick wrote:Posted By: Gary Burnett
Date Posted: 01 Jun 2016 at 3:59pm
|
Just the front end not the whole tractor |
Posted By: Dakota Dave
Date Posted: 01 Jun 2016 at 4:15pm
| $500 I looked for two years and could not find a complete one for less. So I bought a complete running wd45 for $800. Drove it on the trailer and brought it home it was in way better shape than the one I was restoring. |
Posted By: Rick
Date Posted: 01 Jun 2016 at 4:41pm
| I sell the three bolt wide front for 400.00 and the four bolt wide front for 450-500.00 all the time. These are pretty decent wide fronts though. Rick |
Posted By: Alex09(WI)
Date Posted: 02 Jun 2016 at 12:29am
|
I sell 3 bolt for $350 and 4 bolt for $400 in good shape. anything over $500 would be paying an arm and a leg.
------------- www.awtractor.com A&W TRACTOR 920-598-1287 KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY |
Posted By: Rick
Date Posted: 02 Jun 2016 at 2:48am
| Not if you put several new parts in them, Alex. It wouldn't be hard at all to have in excess of 7-800.00 in one, if you bought one and went through it and replaced worn out things. Been there, done that. Rick |